PACKAGED AIR-COOLED CHILLER
R454B | LOW GWP | LOW ODP | 228kW to 1303kW
i-Chiller Process Max-e is the example of targeted design, essential to obtain a reduced management costs without excluding reliability and environmental protection.
With a fully packaged configuration, this chiller features an internal storage tank and pump as standard, offering a plug & play solution with worldwide acclaim. All internal components are accessible with advanced electronic controls.
FOR EVERY TYPE OF PROCESS
The i-Chiller Process Max-e is hugely versatile, and its reliability, combined with extended operating limits for starting up and operating in the worst conditions, makes it suitable for every type of process.
UNIQUE SHELL AND TUBE EVAPORATOR
With a carbon steel shell and copper tubes, it has a single water circuit and a double refrigerant circuit to achieve the maximum efficiency also during the partial load functioning.
Advantages:
- Longer life when compared with plate exchangers
- Prevents blockages occurring with impurities found in process water
- Automatic air bleed valve and a drain valve for easy filling of water and drainage
- Anti-freeze function integrated into electronic controller
FEATURES
-
Refrigerant R454B with a GWP of 466
-
Crankcase heater compressor and phase-monitor
-
Electronic expansion valve
-
Victaulic” hydraulic connections kit (supplied for each unit)
-
Refrigerant and oil charge
-
Tests and checks performed on factory
-
Modbus RS485 serial output for connections to supervision systems
-
Master/slave configuration manageable between 2 units
OPTIONAL
-
MWT version (down to -10°C outlet water temperature)
-
Low ambient temperature option (down to -20°C)
-
Soundproof jacket or housing for compressors (for HE configuration)
-
High efficiency EC brushless fans (base option for SSN version)
-
Total heat recovery
-
Soft starters to reduce by 20% the unit’s starting current